Which resistors are you talking about? Series resistors to the SDA/SCL pins,
or the pullup ones on the SDA/SCL bus? You don't *need* the series resistors..
it would probably work just fine with the pullup's.


Quoting rad0 <rad0@ATTBI.COM>:

> unfortunately I need to go over this again
>
> I am trying to hook up an I2C A/D converter,
> and the SDA and SCL lines show a 2K resistor
> on their example, but the example is using 2.7 to 3.6 vdc
> supply.
>
> So, this can't be what's needed for a 5 vdc supply, can it?
>
> thanks
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>




----------------------------------------
This mail sent through www.mywaterloo.ca

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.