Kyrre Aalerud wrote:
>
> Sounds like too much fuzz.
>
> When I do it by hand, i use a simple 1mm tipped 15-30w iron and I use 0.8mm
> wire with fluxed core.  Sor IC's, start by aligning the chip and soldeing
> one of the corner legs.  Then take the leg on the opposite corner.  Now it's
> simple to do the rest 1 by 1.


Or tack the corners, then just solder the lot using
a normal medium tip iron, (very quickly) and just
remove the few bridges with wick. Why solder pins
one by one?? :o)
-Roman

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.