--=======3A4C5B1C=======
Content-Type: text/plain; x-avg-checked=avg-ok-F822F52; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 8bit

FWIW, the problem eventually was traced to an "undocumented feature" in the
ICD2 firmware. An fix obtained from Microchip after the release of Mplab
V6.12.0 sorted out the problem, which increased tprog from 4mS to 8 mS.

John

At 2003/01/27 09:23 +0200, you wrote:
>Hi all,
>
>I am attempting to program the data EEPROM of a PIC12F629 with an ICD2 via
>ICSP along with the program memory.  The part fails on verification of data
>EEPROM.  On examining the memory programmed , it appears that every even
>address is programmed correctly, and every odd address remains at
>0xFF.  The part(s) program just fine when dropped into a Picstart Plus.
>I am using MPLAB IDE V6.10 on Windows 2000.  Any ideas or thoughts?
>
>TIA
>
>John

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics



--=======3A4C5B1C=======--