Michael Kinsner wrote:
> I am looking for a way to set the default trace width in the EAGLE
> autorouter, such that the autorouted traces will be wider than the
> default 0.01 inch.  Does anybody know how I can do this?
Select "Design Rules Check" in the PCB editor, then set your track width
there. The autorouter uses a lot of DRC settings to define how it routes
tracks around the board - it took me about fifteen minutes to work that out.

Later.
--
Phil.
philpem@dsl.pipex.com
http://www.philpem.dsl.pipex.com/

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu