Jai Dhar wrote:

> > >too high you have the wrong transformer.
> > Instead of 50 volts center-tapped, I
> > think 28 volts center-tapped would suffice.
>
> You are absolutely right - I don't need a xformer that powerful. The problem
> was the surplus store only carried that type at the time.


Find the point where the 2 wires exit the transformer
and are soldered onto the centre tap pin. Then cut one wire,
and re-solder it as 28v in PARALLEL so you get twice the
current. Probably takes 10 minutes and saves you buying a
new transformer.
-Roman

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu