Hi Folks,

In the 16F84 data sheet ( 8.2.3 of DS30430C ) mention is made to
using external TTL and Xtal Osc modules into OSC1 pin.

It also mentions ( 8.2.4 ) an Fosc/4 signal being available from
OSC2 pin when in RC mode.

Is this Fosc/4 signal available on OSC2 while driving OSC1 from an
external TTL oscillator in XT or HS mode ?.

thanks Mike W

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu