Thanks for the help .. the problem was indeed in the fuses. I was using
the Microchip templates and the _LVP_ was ON instead of OFF. Since i
don't use LVP (yet) i turned it off and now the reset works properly.=20

Arno

Quoting Jai Dhar

>>That should be ok - same setup as I have. Did you set your fuses right
while programming? I believe that MCLR can be programmed as a reset or
as something else... not too sure. But check your programming software.

> I have a weird problem with my pic16f877. On power-up everything runs
fine, but as soon as i reset the board doesn't seem to do anything
anymore. MCLR is connected to a 10k pull-up and a resetbutton which is
tied to the ground, so that should work fine. As far as i know, on reset
the program should start at 0x000 .. or am i wrong ?

=20

<http://www.piclist.com/> =20


--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads