And the "Midrange ref manual" have even more detailed
information on this subject.

Jan-Erik S=F6derholm.

-----Original Message-----
From: Jan-erik S=F6derholm (QAC)
[mailto:Jan-erik.Soderholm@PAC.ERICSSON.SE]
Sent: den 3 februari 2003 16:56
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: f877 I2C routines


What's wrong with the 877 data sheet ?

Jan-Erik S=F6derholm

Jai Dhar wrote :
>When searching for information on the 877, it seemed that I could only =
find
>software implementations of the I2C routines when the PIC would be =
acting as a
>master. For slave I found plenty of implementations using the built in
>hardware, but I could not find anything using hardware as a master. =
Could you
>perhaps point me in some direction? (I was using AN554 on Microchip's =
website
>is my main reference). Then I won't have to go through the uneccessary =
hell of
>coding this by hand - and re-coding it with TRIS registers now (since =
I have
>been doing that much wrong so far).

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.