At 10:56 PM 1/26/2003 -0500, you wrote:
>Ok, so to make sure I don't damage my computer, how could I ensure that my
>computer and circuit from my psu will be grounded with eachother? Will simply
>connecting the ground pins on the printer port to my circuit ground do...
>because it doesn't seem sufficient if the computer is grounded to earth (and
>therefore the printerport since I'm assuming the ground pins are grounded with
>the computer also). I really don't want to damage my parport, which is why I'm
>trying to figure out the best thing to do.

Plugged into the same receptacle box will do it, if there is even a problem.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu