> By "breadboard", do you mean one of those solderless breadboards
> such as AP, Global Specialties, etc.?  If so, remember that the
> horizontal buses (busses?) are usually split halfway across...
> they don't run continuously from end to end.  This can cause
> bizarre things to happen if you forget to add jumpers in the
> right spots.  Also, I've found that those things can be less
> than reliable and it pays to verify connections with a meter.

for a picture, see http://www.voti.nl/swp/index_1.html#target

note that not all breadboards have this cut, if fact only one of the
dozen or so I have has it.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics