Hi-
Use http://babelfish.altavista.com/babelfish/tr to translate the page
for you.  Just put in the url and choose German->English and it will
display the page for you translated.  Not bad.
David
PS thanks for the url - looks useful

Lennart Sundberg wrote:

>Yes a logic analyzer would be great, I found John Andrews code on the
>PICList Project page where he uses a 17C756, maybe I can convert it to
>the 16F877 and use it as a Serial Ascii to I2C interface.
>  I also found a parallelport-I2C interface from Ingo Gerlach at
>http://home.welfen-netz.de/IngoGerlach/i2c_par/i2c_par.htm it is made
>out of three simple chips and also gives an 8 channel logic analyzer on
>the screen. It seems to be very useful, but unfortunately the page is
>not in English.
> /Lennart
>
>
>
>-----Original Message-----
>From: pic microcontroller discussion list
>[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Herbert Graf
>Sent: den 22 januari 2003 04:03
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PIC]: I2C debugging
>
>Personally I found a logic analyzer was all I needed to debug my I2C
>problems. TTYL
>
>-----Original Message-----
>From: pic microcontroller discussion list
>[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Jon M (Mike) Jones
>Sent: January 21, 2003 18:05
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PIC]: I2C debugging
>
>
>I faced the same problem a year or two ago. My solution was to connect
>the
>16F877 to a 'know' good slave such as a DS1307 clock chip and started
>debugging from there.
>
>Mike Jones
>pmjones3@attbi.com
>----- Original Message -----
>From: "Lennart Sundberg" <lennartsundberg@HOTMAIL.COM>
>To: <PICLIST@MITVMA.MIT.EDU>
>Sent: Tuesday, January 21, 2003 1:24 PM
>Subject: [PIC]: I2C debugging
>
>
>Hi
>I have implemented an I2C routine in a 16F877 for communication to
>another board with a PIC. But how do I know if my I2C routine is working
>correct before I build up the other board. How can I do this?
>  I have looked around on the web and found a lot of I2C test equipment
>but I don't want to pay a lot of money for some extra hw, that may be of
>little use for me in the future.
> Could you recommend a low cost debugger or how to test the I2C.
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads