SAMTECH

They are as good for samples as Maxim.

Andy

At 08:50 PM 1/21/03 -0800, you wrote:
>Subject says it--I'm trying to source the the PC/104 stackthrough
>connectors for a PIC-based PC/104 module under development.
>
>Both connectors are female, .1" centered, pin and socket type.  One is
>2X32 pin, the other is 2X20 pin. (The PC/104 name comes from these 104
>total pins.)
>
>Both connectors have very long leads that provide for "stacking" boards
>on atop the other by mating with the female portion of the corresponding
>connector in the board below it.
>
>A diagram of this (only showing J1, the 64 pin connector, as J2 is
>optional) is at:
>
>http://www.pc104.org/technology/reg_info.html
>
>As popular as PC/104 is (and the PIC parallel slave port is just begging
>to talk to the PC/104 ISA bus), I have not found a supplier for these as
>discrete connectors.  It may be staring me in the face but I don't see it...
>
>Anyone have any ideas?
>
>Thanks,
>
>-Johnathan Corgan
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads