We use the Samtec ESQ 20u gold series PC/104 "stackthrough"
connectors on our Flash_lab 77 primary & protoboards.

http://www.rentron.com/PicBasic/loader009.gif part # ESQ-120-14-G-D
These are great for stacking boards on top & bottom of your primary
controller.

Get em from Force Electronics 800-303-3363. Call and ask for the full line
Samtec connector catalog. Has some hard to find goodies.

Samtec also has a web site @ http://www.samtec.com


Regards,

-Bruce
tech@rentron.com
http://www.rentron.com



> Subject says it--I'm trying to source the the PC/104 stackthrough
> connectors for a PIC-based PC/104 module under development.
>
> Both connectors are female, .1" centered, pin and socket type.  One is
> 2X32 pin, the other is 2X20 pin. (The PC/104 name comes from these 104
> total pins.)
>
> Both connectors have very long leads that provide for "stacking" boards
> on atop the other by mating with the female portion of the corresponding
> connector in the board below it.
>
> A diagram of this (only showing J1, the 64 pin connector, as J2 is
> optional) is at:
>
> http://www.pc104.org/technology/reg_info.html
>
> As popular as PC/104 is (and the PIC parallel slave port is just begging
> to talk to the PC/104 ISA bus), I have not found a supplier for these as
> discrete connectors.  It may be staring me in the face but I don't see it...
>
> Anyone have any ideas?
>
> Thanks,
>
> -Johnathan Corgan
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads