At 05:46 PM 1/21/03 -0600, you wrote:
>Chris, I am about to start looking for the same thing. Please let me
>know if you find anything...I was going to just make a pad design on my
>own, but based on nothing. So...if you have any leads, or you make a
>package yourself, please let me know!

For a good starting point, you might want to check out IPC-SM-782
at http://www.ipc.org/ . It's still common to tweak from there, but
this is a good professional starting point.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu