my target is a 16f628
I've tried different fuses values but I'm currently trying to program 3FF0
when I use 'xwisp load flash.hex target f628 dump' it reads
2007: 3FF0
when I use 'xwisp write flash.hex' followed by 'xwisp get dump' it reads out
the correct program, but the
2007 line is missing.

Vpp with target connected is 14.06v, without is 14.12

thanks,
        Eben Olson

> - which target are you using?
> - what fuses value are you trying to program? (use 'xwisp load <hex
> file> target f628 dump', fuses is the value after 2007:)
> - what is the Vpp voltage (use 'xwisp tak', then type 0000CX, measture
> the voltage on the yellow wire, with and without the target connected)
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics