At 08:13 AM 1/16/03 -0600, you wrote:
>> I use 2.8kHz in my controls for model motors from 50W to
>>several kW.
>
>Does a 1kW motor still count as a "model" ?  ;-)

1kW is a small motor - it's only going to put about 1 HP out.  We run
motors that will pull 90A sustained at 24V input (2.1kW in), and I make the
controls to handle it.  Most of us only run 1kW motors though due to cost.

Check them out www.rc-hydros.com for the ESCs,
www.montanadesign.com for the Boat Hobby section.

I have them in planes too.  Right now I'm about half done with a P-51, 43"
span.  It will be HOT!

Andy

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu