On Tue, Jan 14, 2003 at 11:10:28PM +0200, Peter L. Peres wrote:
> On Tue, 14 Jan 2003, Patrick Plattes wrote:
>
> *>sorry, there are 470 ohm, not 470k. i've add the 10K resistor, but this
> *>also don't work. i've tried even a 1k, but this also don't work :(
>
> Well remove the pic from the socket and set your dvm to diode test, ground
> lead to ground, and touch the base of the transistor with the positive
> lead. The led should light (of course you need to power the circuit). If
> this works then the problem is the pic ...

ok. this works.

i had found this morningthe problem. it was the pic. if i use an other
pic it works fine.

thank you very much for your help,

patrick.


> Peter
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body