Peter Bennett wrote:
...
> Is there an easier way of getting the 64 output lines, can an
> output board be purchased that does this which is not to expensive?

I'm not sure, but, perhaps, three PIC16F871 could do the job
for US$ 3.6 each ?

> I am also after any help/advice as to the software. As stated
>  it needs to access 1 or all of the 64 outputs manually via the
> computer and also I need a sequencing/automated system
> which can, if possible have timing down to the tenth of second
> or if this is to quick then every 250ms.

These timings and number of outputs could be served under
Windows easily, even from MS VB at 56K RS232, I tried it,
but with up-to-date computer though.

> I have some software experience but would have difficulty
> tackling something of this nature. I would be happy to pay
> someone to do it.

You can make if you try. Ask PICList and you'll get a lot of
real help. Wanna pay? Support  PICList.

Mike.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics