There are a couple errors in the PICDEM 2 Plus User's Guide (DS51275A):

http://www.microchip.com/download/tools/picmicro/icds/mplabicd2/51275a.pdf

1. The schematic (Fig. A-3) on page 18 shows the LCD data pins connected to
port RO0-3 instead of RD0-3.

2. On page 15 the blurb about the LCD (A.11) and table A-1 on that page show
the LCD being supported on 28 pin devices with connections to RD0-3. I haven't
had a chance to ring it out with a meter but the schematic (Fig. A-2, pg. 17)
for the 28 pin device doesn't show pins available for the LCD.


Has anyone come across an errata for this board?
There isn't one on the errata web page:

http://www.microchip.com/1010/suppdoc/errata/index.htm

thanks
chuckc

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads