No, it's black with white text and has article no "319 F-9" printed on it... Mine is F and i want the S version (S = 0.4mm F=0.6mm) ----- Original Message ----- From: "Bob Barr" To: Sent: Saturday, January 11, 2003 2:24 AM Subject: Re: [EE]: Finally found a perfect PCB pen for my plotter! > Is this the white one that they refer to as a "correction marker"? > That's the only one that shows up searching by the 319 part number. > > > Regards, Bob > > > On Wed, 8 Jan 2003 21:50:29 +0100, Kyrre Aalerud wrote: > > >I have now tested the pens I got from Staedtler and compared them to the > >bunch I already had. > >There is no comparison between them! > > > >The pen is a Staedtler Permanent Lumocolor 319 F-9 and is approx 0.4mm > >thick. > >There is supposed to exist a super fine version that's thinner. > > > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body