Spehro Pefhany wrote:
>
> At 04:23 PM 1/8/03 -0800, you wrote:
> >You can get small chucks that fit into a larger chuck that can hold very
> >small drill (bits).

> They are called "micro chucks" here, and offshore made ones cost < $3.


Chucks are not great for tiny bits. If you buy a
little 12v "super rotary tool" etc for about $12 USD
they have a tiny collet chuck and a variety of
collets. One grub screw and the collet chuck removes
and you just stick it in your drill press.
For your $12 you also get some cutting bits and
a few PCB drill bits. :o)
-Roman

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.