There was an errata about supplying ALL power pins, Vdd and AVdd, Vss and
AVss with power.

Andy

At 11:09 PM 1/4/03 +0100, you wrote:
>I have trouble programming the data eeprom of the 18F's (using my own
>programmer, not by a programming running on the PIC). Contrary to what
>p14/15 of the programming manual requires I can (only) get it to work
>when I replace the 'Hold SDATA low until write completes' with a real
>NOP (with clocking for the 16 'data' bits), followed by the wait. Any
>programmer-authors got care to comment?
>
>Wouter van Ooijen
>
>-- -------------------------------------------
>Van Ooijen Technische Informatica: www.voti.nl
>consultancy, development, PICmicro products
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.