a couple of quick questions...

I use the 7805 to regulate my 9vdc wall supply to
+5vdc, but it's off a little. +5.05vdc

I have a 10uf ceramic cap between the +5vdc output
and ground.  This brings the out put up to +5.05 from
4.90 vdc.

The question is how do I tweak this to get +5vdc ?
--just change the value of this capacitor, or are there
other little things that are normally done? or is this
as accurate as these things get?

I don't really care, and I don't think this matters does it?

But, secondly, I want to know if there is a 780x (2)
for giving you +2vdc?

I have finally gotten back to my AtoD setup using,
Vss--Vref- and +2vdc--Vref+

it is working fine, using a 200 ohm and 300 ohm
volatge divider, and that what I will use for now,

I wanted to ask these questions before I forgot, thanks

when talking before about this Vref+ for A/D someone
mentioned precision voltage sources, is this refering to
something like the 7805 for +5vdc ??


thanks for any info

btw the A/D works great, thanks to all from before, jinx,
russell, and all
(it's the only damn thing I can really check with my meter only
workshop.....)

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics