Thanks to Olin and Peter for answering. I found another way to do what I
want so I ended up not needing this information. I did try Peter's idea of
using Windows to check the addresses and they match what I found out by
using the PCI BIOS interrupt services to read the configuration table.

Sean


At 08:03 AM 12/13/2002 -0500, you wrote:
> > How does one determine the base address that has been assigned to a PCI
> > card? I have an RS-422 interface card that I need to use to test out a
> > piece of equipment and since the only drivers available for it are HDLC
> > (and I need to work with a clocked synchronous mode), I am writing a
> > quick DOS program to access it. However, I don't know how to find out
>the
> > base address that the BIOS is assigning to it.
>
>I have no idea about DOS, but on NT there are kernel functions to
>enumerate the busses and determine what's in each slot.  The driver would
>do this at initialization time to determine if there is anything plugged
>in that it knows how to drive, and create the device context if so.
>
>
>*****************************************************************
>Embed Inc, embedded system specialists in Littleton Massachusetts
>(978) 742-9014, http://www.embedinc.com
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

---------------------------------------------
Introducing NetZero Long Distance
1st month Free!
Sign up today at: www.netzerolongdistance.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu