On Thu, 19 Dec 2002, Dave Tweed wrote:

> Olin Lathrop <olin_piclist@EMBEDINC.COM> wrote:
> > One issue with this chip is that it requires all the configuration
> > parameters in an external EEPROM.  Not too bad, but it would be a lower
> > chip count if I could supply the configuration parameters from the
> > microcontroller (18F258) before enabling USB.  The spec sheet completely
> > omits the EEPROM data layout, but I haven't dug around for it on the FTDI
> > site yet.
>
> I see that others have already pointed you in the same direction I was
> going to send you.
>
> There's an article about the FT8U245AM coming in the February 2003 Circuit
> Cellar (issue #151). It's amazing how the topics on this list manage to
> anticipate their editorial schedule.
>

That also reminds me ... there was an aritcle in a recent Nuts & Volts
magazine; don't have it in front of me anymore, but it must have been
either the November of December issue.

-- Mitch

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics