The easiest way to produce artwork is to laser print (600dpi) onto
tracing paper.

Check out my page on making high-quality homebrew PCBs:
=20
www.netcomuk.co.uk/~wwl/pcbs.html



On Sun, 15 Dec 2002 08:21:41 -0500, you wrote:

>I rate your site A+ for content and A+ for presentation!
>John Ferrell
>6241 Phillippi Rd
>Julian NC 27283
>Phone: (336)685-9606
>Dixie Competition Products
>NSRCA 479 AMA 4190  W8CCW
>"My Competition is Not My Enemy"
>
>
>
>----- Original Message -----
>From: "Rick C." <rixy@VVALLEY.COM>
>To: <PICLIST@MITVMA.MIT.EDU>
>Sent: Sunday, December 15, 2002 12:04 AM
>Subject: [EE]: Making quality printed circuit boards
>
>
>> After many years of making printed circuit boards, I'm sharing my =
method
>> to all that are interested.
>> http://www.pic101.com/pcb
>>
>> Rick
>>
>> --
>> http://www.piclist.com hint: The PICList is archived three different
>> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.