In a message dated 12/11/2002 14:22:00 Eastern Standard Time,
picdude@NARWANI.ORG writes:


>  I set it to
> 90mil (few amps in many parts of the circuit), but some
> parts of the circuit don't need 90mils, and this causes
> a clearance problem with small, closely-spaced components
> (the DRC complains about clearance).
>

How much current are you handling?  A .050 trace, 1/2 oz. solder coated
copper will handle about 3.5 amps.
Sid Weaver
W4EKQ
Port Richey, FL

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body