I should add that, yes I can change the line widths
manually after the auto-router is done, but this is
unnecessary extra work that needs to be done every
time some componentis moved around and the autorouter
re-run.

Would be so much nicer to set the rules/params, let
the autorouter run and let the DRC come back with no
errors.

Cheers,
-Neil.



> In Eagle 4.08r2:  when I set the width for a net class
> to a certain value, it forces that class for the entire
> net.  However, in some cases I don't need that much.  A
> good example of this is the ground wire -- I set it to
> 90mil (few amps in many parts of the circuit), but some
> parts of the circuit don't need 90mils, and this causes
> a clearance problem with small, closely-spaced components
> (the DRC complains about clearance).
>
> Is there a way to solve this?
>
> Thanks,
> -Neil.
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body