On Tue, 2002-12-10 at 21:14, Ricky Hussmann wrote:
> Hello all,
>
>     I'm working on my senior design project at my university and we've been
> looking into several wireless transmitter packages. However, most of the
> chips we've found have been BGA. Our sponsor is a local tech company that
> doesn't have the mounting or testing equipment for BGA mounting. Currently
> we're continuing our design with a third party wireless CF card. However,
> I'm still interested in mounting BGA chips. Has anyone had any luck on
> mounting these chips without the expensive equipment and X-ray testing
> facilities?

heh...
don't want to sound too negative, but it's nearly impossible to solder a
BGA package properly without the equipment you are talking about above.
Check with Mark Spencer, from Digium.com that makes telephony cards that
use BGA-packaged devices. he may be able to help you.

> Thanks in advance,
> Ricky Hussmann
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body