Jim, I'll check tonight. Cheers, Peter Homann mailto:Peter.Homann@adacel.com Adacel Technologies Limited, 250 Bay St, BRIGHTON, 3186, AUSTRALIA http://www.adacel.com Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960 Mobile 0421-601 665 -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Jim Robertson Sent: Tuesday, 10 December 2002 1:14 PM To: PICLIST@MITVMA.MIT.EDU Subject: [pic]: Wanted any PCB with 64 pin TQFP Hi Folks, Per change is there anyone in Australia who has any PCB that has a 64-pin TQFP suitable for bedding a 18F6620 onto. My only requirement is to test the ICSP and it does not matter what else is or isn't present as I can butcher the PCB just to get something to solder the chip and a few wires to. (Rather than trying to birds nest with a 20 mil pitch SMD, Ouch!) (However I would gratefully accept anything that was bonus and I would also consider suitable proto boards of commercial nature.) I have my own design coming but there are so many people asking for 18Fxx20 support I am trying to fast track this. Any help appreciated. Regards, Jim Robertson NEWFOUND ELECTRONICS ______________________________ MPLAB compatible PIC programmers. NEWFOUND ELECTRONICS P/L http://www.newfoundelectronics.com ______________________________ -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics