Hi!

I just compared Mr. Touzat's implementation and my board:  Q2 and Q4 are
reversed (emitter MUST BE the pin nearest to PCB border), Q5 is reversed, Q3
stays the way it is drawn. It seems that 3 TO-18 package transistors were
used (metal can) and one TO-92 plastic. Let me know if this helps.

Regards, Samo

----- Original Message -----
From: Brendan Colven <bjcolven@ROGERS.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, December 06, 2002 2:08 AM
Subject: Re: [PIC]: ICD has 5.7Vpp


> ----- Original Message -----
> I'm going to go over the whole circuit again and compare it to Microchip's
> schematics.  Maybe something else is backwards.  I just wish I had a scope
> or a faster multimeter.
>
> Anyone else
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body