The reason I ask is because I'm working on putting a 245B into a CAN
control system for a project at the office.

Andy


At 08:43 AM 12/3/02 +1100, you wrote:
>Andy Kunz wrote:
>>
>> Tony,
>>
>> A or B series part?  Serial (232) or FIFO (245) chip?
>>
>> Andy
>>
>> At 01:51 PM 12/2/02 +1100, you wrote:
>> >Just did one myself.
>> >
>> >Uses FDTI, 16F628, xtal, handful of passives and 1 transistor. High
>> >voltage programs 12 18 28 and 40 pin PIC flash chips in a 40 pin ZIF.
>> >Can also program most C series if external 13V supplied. Also has PC
>> >control of MCLR.
>
>
>Hi Andy,
>
>B series - much nicer to work with.
>
>232
>
>As with all flash devices, overall programming time is decided by the
>internal programming delays so a mega baud transfer interface is not
>really warranted. Only my opinion :-)
>
>--
>Best regards
>
>Tony
>
>mICros
>http://www.bubblesoftonline.com
>mailto:sales@bubblesoftonline.com
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu