Hi, all:-

There does not seem to be any typical or otherwise figures on
clock frequency vs. DC bias resistor on this part. The datasheet
(DS40300B-page 98) refers to the "Electrical Specification"
section, which doesn't seem to have anything in it, only min/max
frequency numbers with no indication of what resistances would
be required to produce those frequencies.

Anyone have even one data point for this? Eg. with a 100K
resistor, I get XX MHz clock.

(There are also a couple of mistakes/omissions on the Pinout
description overview (page 11), none of which have made their
way to the errata yet.)

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu