Thank you very much. I didn't even notice that in there! Just to add to
this, using my code, i flashes the 4 LEDS for 1 second. As my LEDs are
connected to V+  then, the Pins would have to be LOW for the LEDs to light
correctly. So, changing 1 to 0 and 0 to 1 in my PORTA outputs makes the LEDS
work correctly but it look weird, so would it be better to leave 1 as high,
and connect to LEDs to ground? If i don't change anything it works, but
instead of turning LEDs on, the default is all 4 on, and turns 1 off in
sequence.

-Peter
Thanks


----- Original Message -----
From: "Jinx" <joecolquitt@CLEAR.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, November 29, 2002 8:48 PM
Subject: Re: [PIC]: First ASM problems


> Do you have CONFIG matched to the crystal speed ?
>
> >  __CONFIG _CP_OFF & _XT_OSC
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics