Hi,

Brendan Moran wrote:
>So, while looking for a usb micro, I came across another solution.
>National makes two USB peripherals with part numbers USBN9603
>(http://www.national.com/pf/US/USBN9603.html) and USBN9604
>(http://www.national.com/pf/US/USBN9604.html).
>They both contain the full requirements for connection at high speed to
the
>USB, the 9604 is for bus powered operation, and the 9603 is for self
>powered operation.  They both run off of  24MHz crystals.
>
>These are devices that connect much the way a memory would.  They
connect
>either in serial mode, via SPI, or in parallel mode, with an 8-bit bus.
>
>Looks to me like a simple solution for how to get a PIC onto USB.
>
>Of course writing the subsequent driver is another question entirely,
but
>it is an easy way to handle the hardware with primarily existing
components.

Well one's milage may wary depedning on the purpose of thew usb i/f but
for me I think the absolute best solution is to use one of the FTDI
chip's
then there's no need to worry about drivers rtc. ( they're included ).
Also fairly cheap ( <5$).

Look at: http://www.ftdichip.com/

Really awsome, serial (aka RS232) or parallel versions, protoboard etc.

Neat critters.

/Tony

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics