Hi,

I was a bit confused by  which pins/points i should touch with the
led/resistor. Could you please tell me?

-Peter
----- Original Message -----
From: "Wouter van Ooijen" <wouter@VOTI.NL>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, November 28, 2002 12:01 AM
Subject: Re: [PIC]: Wisp629


> You got the echo, so the serial port seems to be OK.
>
> > __main__.WBus_Protocol_Error: send='t' received=''
>
> The error message is next to meaningless to anyone but me, but basically
> it just says that the programmer does not respond at all.
>
> Maybe the 16F628 is not running. It needs 5 Volt. Did you check the LED
> as mentioned in the FAQ?
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu