Dale,
        I am running an external 20Mhz ceramic resonator. The timing appears
to be correct. The part runs, I just get no ADC value.  Vref is VDD
and the input to AN0 can be adjusted from 60mv to 4.2V. The ADC
returns [0].

Using MPLAB v. 6.10.00 the simulator indicates that the ADC should be
working. The step through looks good... ??????

More confused, to much information, overload inevitable...... Caution
Will Robinson........Danger, Danger......

Gordon Varney
www.iamnee.com
www.talk2it.com A voice Recognition project.


> On Wed, 27 Nov 2002, Gordon Varney wrote:
>
> > Thanks, I will look closer and see if there is anything obvious.
>
> I seem to recall in my case the problems were mostly
> related to delay_ms
> and delay_us not being correct in some cases.  Setting
> internal RC osc
> mode really screwed things up, and it wasn't loading the
> osccal when it
> should have.
>
> Dale
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu