Hiya,

Tony, thanx for taking the time to answer.  My productivity has been reduced
to approximately 0 because of problems with my HP 752n PC - If you are
considering buying this system, then you should be aware that it does NOT
work properly under Windows/XP.  I have three case numbers with HP customer
support right now with resolution nowhere in sight.

The 16F675 does have the same program algorithm, but uses a different erase
algorithm.  Sorry for the problems with the YAP-II on this part.  I have
been planning on updating the El Cheapo software to support this part, but I
haven't been able to get very far (see problem in the first paragraph).

If you have sent a question to me and I haven't responded, please send it
again to me - I have been alternatively loosing all my email over the past
two months.

myke
----- Original Message -----
From: "Tony Nixon" <tony.nixon@ENG.MONASH.EDU.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, November 20, 2002 11:10 PM
Subject: Re: [PIC]: YAP-2 won't erase my 12F675


> Eric von Hoene wrote:
> >
> > OK, all you with YAP-2 programmers (Myke??), I got it
> > to program my 8-pin 12F675, but how come it won't
> > erase it?  It's just like I have an OTP, which is not
> > very helpful.  A 16F84 chip works just fine, and as
> > far as I can tell the programming specs are
> > compatible.  There must be a way to get these to work
> > together.  I don't want to have to buy another
> > programmer!
>
> The 675 EraseAll procedure is totaly different than the 84 chips.
>
> --
> Best regards
>
> Tony
>
> mICros
> http://www.bubblesoftonline.com
> mailto:sales@bubblesoftonline.com
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics