Peter,

> This time on the board. I make a single sided board. I print text on
> it.
> The text appears mirrored (on bottom layer). I want to make it read
> right
> through the board so I use Mirror. The text is mirrored and appears on
> the
> top layer. Mirror is tagain and is on the bottom layer. Huh ?

Not sure which EAGLE you are using, but I use EAGLE 3.55. From memory,
if you put text on the bottom layer, it appears "mirrored" on the
screen. This is actually "right" reading when you print the copper.
However, I put a "header block" of text on each film (board number,
layer name, print date, company information etc.) where I want the text
to read "right" or, reverse to EAGLE's default.

I honestly can not remember how I did this, but have you tried;

1. Put the text on the "Top" Copper layer
2. Choose "Change", "Layer", "Bottom"

What happens?

I will try tomorrow on my PC if you don't get a satisfactory answer
before then.

Cheers,

Sean

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads