Sounds very good. Thanks Andrew.

-----Original Message-----
From: Andrew Warren <aiw@CYPRESS.COM>
To: PICLIST@MITVMA.MIT.EDU
Date: Fri, 22 Nov 2002 14:51:34 -0800
Subject: Re: [OT]:Need to divide Frequency by 163.

> Vic Lopez <PICLIST@mitvma.mit.edu> wrote:
>
> > I am in need to divide a 12.5 Mhz clock by 163. How can this be
> > done with a counter? I know that if this division were a power of
> > two, then it would be very straight forward, but this is not my
> > case at all. .... yes, it is a square wave.
>
> Vic:
>
> Build a counter that increments on every edge of your input clock.
> When the counter reaches 163, reset it to 0 and toggle your output.
>
> -Andy
>
> === Andrew Warren -- aiw@cypress.com
> === Principal Design Engineer
> === Cypress Semiconductor Corporation
> ===
> === Opinions expressed above do not
> === necessarily represent those of
> === Cypress Semiconductor Corporation
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>




*********************************
Get your free E-Mail and Homepage
Go to http://www.networld.com
*********************************

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu