At 04:49 PM 11/22/02 -0500, you wrote:
>Hi, Josh
>yes this does work
>what I have done after transfer lay the board down on a flat surface then
>take a can of clear spray paint and cover the silk screen looks nice!!!!'''

It works fine with the transfer paper that Digikey sells, however you
can't clean the board after soldering with the usual abandon if you
want the markings to say.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu