Does it need to be a square wave? If single pulses are OK, use a reloadable
down counter that reloads 162 on every underflow.

Vic Lopez wrote:
>
> Hello,
>      I am in need to divide a 12.5 Mhz clock by 163. How can this be
> done with a counter? I know that if this division were a power of two,
> then it would be very straight forward, but this is not my case at all.
> Any pointers will be greatly appreciated. -Vic
>
> *********************************
> Get your free E-Mail and Homepage
> Go to http://www.networld.com
> *********************************
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu