I would check directions of portb and any other registers concering portb's functions. You may find you are reading correctly, but can't output... Kyrre ----- Original Message ----- From: "Nick Veys" To: Sent: Wednesday, November 20, 2002 9:03 PM Subject: Re: [PIC]: Reading EEPROM > What doesn't work about it? > > It looks like you're reading EEPROM values and putting them out to PORTB > if they are not zero, if they are zero you have an infinite loop it > would appear, unless you have an interrupt modifying EEPROM values > elsewhere. > > Nick Veys / nick@veys.com / www.veys.com > > ] -----Original Message----- > ] From: pic microcontroller discussion list > ] [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Royce Simmons > ] Sent: Wednesday, November 20, 2002 1:47 PM > ] To: PICLIST@MITVMA.MIT.EDU > ] Subject: [PIC]: Reading EEPROM > ] > ] > ] Hello All, > ] > ] I am trying without any success to read data from EEPROM in a > ] 16F628, attached is a fragment that I am using that does not > ] work. Prehaps someone can point out the error of my ways. > ] Or show me a better bit of code to use. > ] > ] Sure would appreciate it, Royce > ] > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > > > -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.