Thanks, Wouter.  I'll take a look. I'm driving the display directly - it
doesn't need a driver.

I'm really pleased with the Wisp628 programmer

At 08:32 PM 11/19/2002 +0100, you wrote:
> > However, I can't seem to make the pass through stuff work.
>
>Note that there is a test program on the wisp628 page (using a 16F877).
>
>In a private mail you stated that your PIC uses RB6 as output, but the
>programmer expects to use RB6 as input to the PIC. So either use RB7 as
>ouput, or connect the AUX input (pin8 of the programmer) (also) to RB6
>of the target and use the 'aux' setting for the TTY command (I think
>AUXI, because you use a max232 to talk to the serial display?)
>
>Wouter van Ooijen
>
>-- -------------------------------------------
>Van Ooijen Technische Informatica: www.voti.nl
>consultancy, development, PICmicro products
>
>--
>http://www.piclist.com hint: The list server can filter out subtopics
>(like ads or off topics) for you. See http://www.piclist.com/#topics

Larry Bradley
Orleans (Ottawa), Ontario, CANADA

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics