Dennis Crawley wrote:
>
> > Can anyone elses PICstart+  erase a code protected
> 16F628 part.
>
> Try this:
>
> Note: If the device is code protected, the BULK
> ERASE command will not work.
>
> 2.3.2.10 Bulk Erase Data Memory
> To perform a bulk erase of the data memory, the
> following
> sequence must be performed.
> 1. Do a "Load Data All 1's" command.
> 2. Do a "Bulk Erase Data Memory" command.
> 3. Do a "Begin Programming" command.
> 4. Wait 10 ms to complete bulk erase.
>
> DS30034C-page 7
>
> Dennis.


I know all that, I sell my own programmer :-)

My programmer erases a code protected 16F62x chip, but my PICstart+
won't. Just wondering if anyone else has the same problem. I have the
latest firmware and MPLAB.

--
Best regards

Tony

mICros
http://www.bubblesoftonline.com
mailto:sales@bubblesoftonline.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu