Coating on inkljet transparancies are simply a protein-membrane.
You can make it yourself with a very clean piece of transparancie and some
eggwhite.
Best result is to thinn the eggwhite just a tad and use a airbrush to apply.

(Yes, I have actually done this.  I am mad :-)

    Kyrre

----- Original Message -----
From: "Brent Brown" <brent.brown@CLEAR.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, November 13, 2002 11:55 PM
Subject: Re: [EE]: Printer to PCB?


> Just to add to the brain storm session:-
>
> Ink jet transparencies have a special coating that accepts the ink
> and allows it to dry. Looking into this might give some ideas, ie.
> could even be a way the copper surface can be chemically prepared.
>
> For the photoplotter idea Luxeon make very high power (1W and 5W)
> blue LEDs (460nm) used for dental curing. Say aaaahhhh.
>
> Brain empty now.
>
> --
> Brent Brown, Electronic Design Solutions
> 16 English Street, Hamilton, New Zealand
> Ph/fax: +64 7 849 0069
> Mobile/txt: 025 334 069
> eMail:  brent.brown@clear.net.nz
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads