"I haven't tried measuring how much current they put out."

Or, specifically, how mush current you are allowed
to 'draw' before the voltage varies excessively!

Testing these buggers ought to be your first priority -
measuring the voltage output with several different
resistive loads applied (10% rated load current,
50% and 100% ...).

I would *also* beg, borrow or buy a scope to
observe the 'ripple' these thing 'put out' - they
may wind up being unsutable to power electronic
circuits if they were meant to just 'charge
batteries'.

RF Jim



----- Original Message -----
From: "Josh Koffman" <listsjosh@3MTMP.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Sunday, November 10, 2002 12:43 PM
Subject: Re: [EE]: SMPS Stability


> I have measured them, and they seem to be pretty much sticking to the
> label, at least in terms of voltage. I haven't tried measuring how much
> current they put out.
>
> Josh

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.