You're not supposed to print on foto-resist.
The whole point would be to print directly on bare copper PCB.
The ink will protect the copper just as the photo-resist would as long as it
is waterproof and thick enough.

    Kyrre

> It is a idea, but the ink doesn't adhere to photoresist.
> The result looks like printing on a grease surface.
> Cristian
> >On Fri, 8 Nov 2002, Alan B. Pearce wrote:
> *>How about using an inkjet to print on UV sensitised laminate,
> >This should be tried. Good idea.
> >
> >Peter
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.