Olin - I hate to creep but that library is just so much nicer than the
standard Eagle one (and the pins appear to be in the right place ;)

Thanks for that

Dom
----- Original Message -----
From: "Olin Lathrop" <olin_piclist@EMBEDINC.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, November 08, 2002 1:17 PM
Subject: Re: [PIC]: Eagle Libraries for PICs


> > Hi all. I've searched, but come up with nothing. I'm looking for Eagle
> > library files for the 16f628 and the 18f452. Anyone have these?
>
> I've attached an Eagle library that contains a small collection of PICs,
> including the 16F628.
>
> > I just
> > downloaded Eagle and I really have no clue how to make them on my own.
>
> You should learn.  It's all in the manual and help files, which is how I
> learned it.
>
> I find I make my own Eagle parts a lot.  I often don't like their symbols,
> pad shapes, drill sizes, etc.  You get the impression that they were made
> by someone who had a lot of parts to make and just wanted to get it over
> with.  Attention to detail and niceties are often missing.  For some
> reason they often use oblong pad shapes for DIP holes and don't show pin
> one with a different shape.  I like to make the pin 1 pad square and all
> others round.  This can save you from lots of stupid errors when debugging
> on the back of the board.
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads