I won't have that problem as I don't need ack's and I send 1+8+2 while
talking with a system using 1+8+1 thus I get resynched on each byte...

What I am concerned about is clock error on the last two bits...

    Kyrre

----- Original Message -----
From: "Tony Nixon" <tony.nixon@ENG.MONASH.EDU.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, November 08, 2002 12:43 AM
Subject: Re: [PIC]: How is the stability of the 16F628's internal oscillator
?


> Kyrre Aalerud wrote:
> >
> > Anyone have any experiences to share ?
> >
> > I am writing a system that will use 2 software RS232 connections at
9600.
> > (I don't use the internal usart because I already had perfectly adjusted
> > code that could handle both ports in the same routine, so I save
space...)
>
> I've had problems sending more than a few bytes at a time.
>
> Fixed it by sending byte ACK byte ACK etc....
>
> --
> Best regards
>
> Tony
>
> mICros
> http://www.bubblesoftonline.com
> mailto:sales@bubblesoftonline.com
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu